NarcBox - Pouch Audit
Press 'Audit'
Enter Credential(s) for User 1 - PIN/BIO/RFID
Enter Credential(s) for User 2 - PIN/BIO/RFID
Scan the Pouch RFID or enter manually
Scan the Security Seal RFID or enter manually
If the pouch seal is unbroken the Audit will be complete, "Report Saved, Unbroken Seal"
If the pouch seal is broken or missing, press 'Skip' on the Scan Security Seal screen
"Confirm: Pouch is missing a security seal? (Audit Required)"
Press ‘Proceed’
Match RFID Tags for Meds: Press once for present (green), press twice for absent (red)
Once all medications have been accounted for, press ‘Save’
"Save Report?", press ‘Save’
***Optional Reseal Pouch
"Reseal Pouch?", press ‘Yes’. If not, select ‘No’ and you have completed the Audit.
Scan Security Seal RFID or enter manually
Press ‘Apply’
"New Security Seal has been applied"
Related Articles
Pouch Transactions, FW 3.40+
Pouch Transactions for NarcBoxes running on Firmware 3.40.00 and above *Printable PDF cards at the bottom of this page Check In/Out Pouch Press ‘Manage Inventory’ Enter User(s) Credentials - PIN/RFID/BIO Press ‘Check In’ or ‘Check Out’ Scan the Pouch ...NarcBox Firmware Update Changelog
3.43.16 - 1/27/2026 All new event message file and handling implemented Cradlepoint specific enhancement for connection "close" Increased stack size from 12k to 16k for stability Fixed stuck error reports Found and resolve major system interrupts - ...HQ- Full Audit Pouch
Full Audit Pouch Select 'Manage Inventory' Enter User(s) Credentials - PIN/RFID/BIO Select 'Pouches' (in top menu), then select 'Audit' Select which Locker you would like to audit Select 'Full Audit' Scan or press 'Enter RFID Manually' for all Tagged ...Track Shift Changes and Inventory Audits
The Shift Change and Inventory Audit feature is activated on the website under Settings located on the left navigation panel and the Shift Change/Temperature tab. Once activated, the NarcBox can be used to track shift changes and audits. During a ...NarcBox - Pouch Reseal
Press ‘Manage Inventory’ Enter Credential(s) for User 1 - PIN/BIO/RFID Press ‘Reseal’ Enter Credential(s) for User 2 - PIN/BIO/RFID Scan the Pouch RFID or enter manually "This pouch must be audited before it can be sealed", press 'Proceed' Match RFID ...